Products

1
Yes
None
1
100
Search
/catalog/
Thumbnail
Sort By:

Categories:

Reverse Osmosis
QMPBALL
10.09
QMPBALL Image

QMP-BALL is a 1/4″ shut off Ball Valve for our RO water storage tank.

QMPDS14
9.30
QMPDS14 Image

QMP-SD14 is our 1/4″ compression Drain Saddle Clamp. It attaches to a preexisting drainage pipe so that the dirty water from your RO system can drain.

QMPDS38
9.30
QMPDS38 Image

QMP-SD38 is our 3/8″ compression Drain Saddle Clamp. It attaches to a preexisting drainage pipe so that the dirty water from your RO system can drain.

QMPSDL
9.46
QMPSDL Image

QMP-SDL is our brass Self-Piercing Saddle Valve. It attaches typically to copper pipes to connect any under the sink unit to your water supply.

QMP-SD14-C
9.30
QMP-SD14-C Image

QMP-SD14C is our 1/4” C Style lead free Self-Piercing Saddle Valve. It attaches typically to copper pipes to connect any under the sink unit to your water supply.

QMP-SD14-C38
9.30
QMP-SD14-C38 Image

QMP-SD14-C38 is our 3/8” C Style lead free Self-Piercing Saddle Valve. It attaches typically to copper pipes to connect any under the sink unit to your water supply.

QMP547
25.20
QMP547 Image

QMP547 is our Automatic Shut Off Valve used for Reverse Osmosis units. This is needed to insure that the storage tank for the RO system does not overflow.

QMP4TANK
97.06
QMP4TANK Image

QMP4TANK is our 4 Gallon Reverse Osmosis Tank. Water goes through a reverse osmosis membrane very slowly and so for this reason our residential RO units use a water storage tank to store the purified water. The RO tank delivers stable and constant water flow when the faucet is turned on.

QMP3BRK
10.43
QMP3BRK Image

QMP3BRK is our Light Weight Triple Plastic System Bracket. The bracket mounts the filtration unit to the wall and is available in metal.

QMP1212
13.40
QMP1212 Image

QMP1212 is our brass hex feed adapter that provides a top quality connection to the water supply. (NOT for sale in CA or UT.)

QMP1212P
16.70
QMP1212P Image

QMP1212P is our lead free plastic hex feed adapter that provides a top quality connection to the water supply.

QMP300WR
5.06
QMP300WR Image

QMP300WR is our standard Slim Boy Water Filter Housing Wrench that is compatible with all of our standard housings and slim boy housings except the big boy line.

Only use our wrench to loosen filter housings, never to tighten. Over tightening the housing can cause damage to the O-rings and make re-opening extremely difficult so only hand tighten.

For stubborn filter housings use two wrenches together to get maximum power, where one wrench might not work properly.

QMP301
14.16
QMP301 Image

QMP301 is our 2”x 12” Membrane Housing 1/8 NPT and Cap used in home RO systems and fits most standard residential Reverse Osmosis Membranes. We are custom RO membrane housing manufacturers and suppliers.

QMP301CD
0.66
QMP301CD Image

QMP301CD is our 2”x 2.5” Plastic Double Membrane Clip that snugly connects a standard RO membrane housing to another standard inline cartridge on the Reverse Osmosis unit.

QMP301CDD
0.75
QMP301CDD Image

QMP301CDD is our 2.5”x 2.5” Plastic Double Membrane Clip that snugly connects a standard RO membrane housing to another standard inline cartridge on the Reverse Osmosis unit.

QMP302CS
0.66
QMP302CS Image

QMP302CS is our 2.5” Plastic Single Membrane Clip that snugly connects a standard RO membrane housing to the Reverse Osmosis Unit.

QMP1BRK
3.83
QMP1BRK Image

QMP1BRK is our Light Weight Single Plastic System Bracket with 8 screws. The bracket mounts the filtration unit to the wall and is available in metal.

QMP2BRK
9.10
QMP2BRK Image

QMP2BRK is our Light Weight Double Plastic System Bracket. The bracket mounts the filtration unit to the wall and is available in metal.

Reverse Osmosis
QMPBALL Image
QMPBALL
QMP-BALL is a 1/4″ shut off Ball Valve for our RO water storage tank.
10.09
QMPDS14 Image
QMPDS14
QMP-SD14 is our 1/4″ compression Drain Saddle Clamp. It attaches to a preexisting drainage pipe so that the dirty water from your RO system can drain.
QMPDS38 Image
QMPDS38
QMP-SD38 is our 3/8″ compression Drain Saddle Clamp. It attaches to a preexisting drainage pipe so that the dirty water from your RO system can drain.
QMPSDL Image
QMPSDL
QMP-SDL is our brass Self-Piercing Saddle Valve. It attaches typically to copper pipes to connect any under the sink unit to your water supply.
QMP-SD14-C Image
QMP-SD14-C
QMP-SD14C is our 1/4” C Style lead free Self-Piercing Saddle Valve. It attaches typically to copper pipes to connect any under the sink unit to your water supply.
QMP-SD14-C38 Image
QMP-SD14-C38
QMP-SD14-C38 is our 3/8” C Style lead free Self-Piercing Saddle Valve. It attaches typically to copper pipes to connect any under the sink unit to your water supply.
QMP547 Image
QMP547
QMP547 is our Automatic Shut Off Valve used for Reverse Osmosis units. This is needed to insure that the storage tank for the RO system does not overflow.
25.20
QMP4TANK Image
QMP4TANK
QMP4TANK is our 4 Gallon Reverse Osmosis Tank. Water goes through a reverse osmosis membrane very slowly and so for this reason our residential RO units use a water storage tank to store the purified water. The RO tank delivers stable an... Read More
97.06
QMP3BRK Image
QMP3BRK
QMP3BRK is our Light Weight Triple Plastic System Bracket. The bracket mounts the filtration unit to the wall and is available in metal.
10.43
QMP1212 Image
QMP1212
QMP1212 is our brass hex feed adapter that provides a top quality connection to the water supply. (NOT for sale in CA or UT.)
13.40
QMP1212P Image
QMP1212P
QMP1212P is our lead free plastic hex feed adapter that provides a top quality connection to the water supply.
16.70
QMP300WR Image
QMP300WR
QMP300WR is our standard Slim Boy Water Filter Housing Wrench that is compatible with all of our standard housings and slim boy housings except the big boy line. Only use our wrench to loosen filter housings, never to tighten. Ove... Read More
QMP301 Image
QMP301
QMP301 is our 2”x 12” Membrane Housing 1/8 NPT and Cap used in home RO systems and fits most standard residential Reverse Osmosis Membranes. We are custom RO membrane housing manufacturers and suppliers.
14.16
QMP301CD Image
QMP301CD
QMP301CD is our 2”x 2.5” Plastic Double Membrane Clip that snugly connects a standard RO membrane housing to another standard inline cartridge on the Reverse Osmosis unit.
QMP301CDD Image
QMP301CDD
QMP301CDD is our 2.5”x 2.5” Plastic Double Membrane Clip that snugly connects a standard RO membrane housing to another standard inline cartridge on the Reverse Osmosis unit.
QMP302CS Image
QMP302CS
QMP302CS is our 2.5” Plastic Single Membrane Clip that snugly connects a standard RO membrane housing to the Reverse Osmosis Unit.
QMP1BRK Image
QMP1BRK
QMP1BRK is our Light Weight Single Plastic System Bracket with 8 screws. The bracket mounts the filtration unit to the wall and is available in metal.
QMP2BRK Image
QMP2BRK
QMP2BRK is our Light Weight Double Plastic System Bracket. The bracket mounts the filtration unit to the wall and is available in metal.