A cut
 
the rest

Proudly
manufactured
in the USA
QMP1212
602C

QMP1212 is our brass hex feed adapter that provides a top quality connection to the water supply. (NOT for sale in CA or UT.)
QMP1212P"
602C

QMP1212P is our lead free plastic hex feed adapter that provides a top quality connection to the water supply.
QMP 300WR
602C

QMP300WR is our standard Slim Line Water Filter Housing Wrench that is compatible with all of our standard housings and slim line housings except the big boy line.

Only use our wrench to loosen filter housings, never to tighten. Over tightening the housing can cause damage to the O-rings and make re-opening extremely difficult so only hand tighten.

For stubborn filter housings use two wrenches together to get maximum power, where one wrench might not work properly.
QMP301
602C

QMP301 is our 2”x 12” Membrane Housing 1/8 NPT and Cap used in home RO systems and fits most standard residential Reverse Osmosis Membranes. We are custom RO membrane housing manufacturers and suppliers.
QMP301CD
602C

QMP301CD is our 2”x 2.5” Plastic Double Membrane Clip that snugly connects a standard RO membrane housing to another standard inline cartridge on the Reverse Osmosis unit.
QMP302CS
602C

QMP302CS is our 2.5” Plastic Single Membrane Clip that snugly connects a standard RO membrane housing to the Reverse Osmosis Unit.
QMP1BRK
602C

QMP1BRK is our Light Weight Single Plastic System Bracket with 8 screws. The bracket mounts the filtration unit to the wall and is available in metal.
QMP2BRK
602C

QMP2BRK is our Light Weight Double Plastic System Bracket. The bracket mounts the filtration unit to the wall and is available in metal.
QMP3BRK
602C

QMP3BRK is our Light Weight Triple Plastic System Bracket. The bracket mounts the filtration unit to the wall and is available in metal.
QMP4TANK
602C

QMP4TANK is our 4 Gallon Reverse Osmosis Tank. Water goes through a reverse osmosis membrane very slowly and so for this reason our residential RO units use a water storage tank to store the purified water. The RO tank delivers stable and constant water flow when the faucet is turned on.
QMP547
602C

QMP547 is our Automatic Shut Off Valve used for Reverse Osmosis units. This is needed to insure that the storage tank for the RO system does not overflow.
QMP-BALL
602C

QMP-BALL is a 1/4" shut off Ball Valve for our RO water storage tank.
QMP-DS14
602C

QMP-SD14 is our 1/4" compression Drain Saddle Clamp. It attaches to a preexisting drainage pipe so that the dirty water from your RO system can drain.
QMP-DS38
602C

QMP-SD38 is our 3/8" compression Drain Saddle Clamp. It attaches to a preexisting drainage pipe so that the dirty water from your RO system can drain.
QMP-SDL
602C

QMP-SDL is our brass Self-Piercing Saddle Valve. It attaches typically to copper pipes to connect any under the sink unit to your water supply.
QMP SD14-C
602C

QMP-SD14C is our 1/4” C Style lead free Self-Piercing Saddle Valve. It attaches typically to copper pipes to connect any under the sink unit to your water supply.
QMP SD14-C38
602C

QMP-SD14-C38 is our 3/8” C Style lead free Self-Piercing Saddle Valve. It attaches typically to copper pipes to connect any under the sink unit to your water supply.
QMP301CDD
602C

QMP301CDD is our 2.5”x 2.5” Plastic Double Membrane Clip that snugly connects a standard RO membrane housing to another standard inline cartridge on the Reverse Osmosis unit.