A cut
 
the rest

Proudly
manufactured
in the USA
QMP100-5B
602C
QMP100-5B is our black plastic faucet handle. This handle comes standard with any of the 100 series faucets.
QMP100-5W
602C
QMP100-5W is our white plastic faucet handle. This handle comes standard with any of our 100 series faucets.
QMP100-7B
602C
QMP100-7B is our thick black faucet washer. This washer comes in the standard faucet washer set, QMP522.
QMP100-7W
602C
QMP100-7W is our thick white faucet washer. This washer comes in the standard faucet washer set, QMP522.
QMP TIP-B
602C
QMPTIP-B is a black faucet tip used for our standard spouts. This faucet tip comes with two of our faucet repair kits, QMP519 & QMP519-TF.
QMP TIP-W
602C
QMPTIP-W is a white faucet tip used for our standard spouts. This faucet tip comes with two of our faucet repair kits, QMP519 & QMP519-TF.
QMPHC2
602C
QMPHC2 is a 2 inch sink hole cover used to cover up holes in your countertop where a faucet or other type of connection used to exist.
QMPHC134
602C
QMPHC134 is a 1 ¼ inch sink hole cover used to cover up holes in your countertop where a faucet or other type of connection used to exist.
QMP100EXT
QMP100EXT is a faucet extension shank with nut. This part is used for think counter tops, such as granite, to elongate the faucet shank so that the filtration unit can be connected to the faucet.
519
QMP100-4
QMP100-4 is the faucet tee bar used to connect the faucet handle to the faucet body. This is used as a replacement component for your faucet.
519
QMP100-3
QMP100-3 is the retainer valve and can be used as a replacement component for your faucet.
519
QMP1002SS
QMP100-2SS is the stainless steel valve stem and can be used as a replacement component for your faucet.
519
QMP100-2A
QMP100-2A is the stainless steel faucet spring and can be used as a replacement component for your faucet.
519
QMP100-13P
602C
QMP100-13P is the plastic insert used to keep a tight grip on the tubing attached to the faucet. This can be used as a replacement component for your faucet.
QMP100-001
602C
QMP100-001 is a washer that comes in chrome to match the color of your faucet as it is seen above the sink. This is used as a replacement component for your faucet.
QMP100-13
602C
QMP100-13 is the brass insert used to keep a tight grip on the tubing attached to the faucet. This can be used as a replacement component for your faucet.
QMP100-8
602C
QMP100-8 is our thin black rubber washer that comes in our standard faucet repair kits or can be bought separately as a replacement part.
QMP100-9
602C
QMP100-9 is our 7/16 lock washer that comes in our standard faucet repair kits or can be bought separately as a replacement part.
QMP100-12P
602C
QMP100-12P is a plastic ferrule used to keep the compression nut tight and is used as a replacement component for your faucet. It is available in 1/4 half, 1/4 full, 3/8 half, and 3/8 full.
QMP 100-12
602C
QMP100-12 is a brass ferrule used to keep the compression nut tight and is used as a replacement component for your faucet.
QMP100-11
602C
QMP100-11 is our brass compression nut used to secure the tubing with the faucet shank. This is used as a replacement component for your faucet.
QMP100-10
602C
QMP100-10 is our brass hex faucet nut used to tighten the faucet to the sink. This is used as a replacement component for your faucet.
QMP100-1.3
602C
QMP100-1.3 is a 1.3 inch tall faucet shank where the tubing connects to the faucet. This is used as a replacement component for your faucet.
We have a color matching option that allows you to match the faucet of your choice to other preexisting hardware in your kitchen.
Available Colors